AUMA SAREx 10.2 User Manual

Control
Parallel
Profibus DP
Profinet
→ Modbus RTU
Modbus TCP/IP
Foundation Fieldbus
HART
Multi-turn actuators
SAEx 07.2 – SAEx 16.2
SAREx 07.2 – SAREx 16.2
Control unit - electromechanical
with actuator controls
ACExC 01.2 Intrusive
Assembly and commissioningOperation instructions

AUMA SAREx 10.2 Specifications

General

Type of actuator	Multi-turn actuator
Protection class	IP68
Explosion protection	ATEX, IECEx
Housing material	Aluminium
Control signal	4-20 mA, 0-10 V

Summary

Safety Instructions

Warnings and Notes

Name Plate

Assembly

Mount Actuator to Valve

Electrical Connection

KT/KM Electrical Connection

Specifics on KT/KM electrical connection types.

Fieldbus Cables: Connect

Procedures for connecting fieldbus cables.

KP/KPH Electrical Connection

Specifics on KP/KPH electrical connection types.

KES Electrical Connection

Specifics on KES electrical connection types.

Operation

Motor Operation

User Level, Password

Explanation of user levels and password management.

Indications

Feedback Signals from Actuator and Valve

Signals (Output Signals)

Status Signals via Output Contacts (Digital Outputs)

Commissioning (Basic Settings)

Type of Seating: Set

Procedure for setting the valve seating type (limit or torque).

Torque Switching: Set

Instructions for setting the torque switching parameters.

Limit Switching: Set

Procedure for setting the limit switching for travel.

Commissioning (Optional Equipment Settings)

EWG 01.1 Electronic Position Transmitter

Measuring Range: Set

Corrective Action

Faults During Operation/Commissioning

Common faults and their causes during setup.

Fuses

Information on fuses within the actuator controls.

Fuse Replacement

Servicing and Maintenance

Preventive Measures for Servicing and Safe Operation

Disconnection from the Mains