AUMA SQEx 10.2 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting ) of actuator controls ACExC 01.2 Modbus TCP/IP
●
Manual (Fieldbus device integration) of actuator controls ACExC 01.2 Modbus TCP/IP
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
61.2. Range of application
61.3. Warnings and notes
71.4. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
122.2. Short description
133. Transport, storage and packaging........................................................................................
133.1. Transport
143.2. Storage
153.3. Packaging
164. Assembly................................................................................................................................
164.1. Mounting position
164.2. Handwheel fitting
164.3. Part-turn actuator to valve: mount
174.3.1. Output drive for coupling
174.3.1.1. Part-turn actuator (with coupling): mount to valve
204.4. Mounting positions of local controls
204.4.1. Mounting positions: modify
215. Electrical connection.............................................................................................................
215.1. Basic information
235.2. KES electrical connection
245.2.1. Terminal compartment: open
255.2.2. Cable connection
265.2.3. Industrial Ethernet cable: connect
275.2.4. Terminal compartment: close
275.3. External earth connection
285.4. Accessories for electrical connection
285.4.1. Actuator controls on wall bracket
2
SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)
Table of contents ACExC 01.2 Non-Intrusive Modbus TCP/IP