AUMA SQV 05.2 User Manual

295.4.2. Signal range of analogue output 1
305.4.3. Adjustment of analogue output 1
305.4.4. Assignment of analogue output 2
305.4.5. Signal range of analogue output 2
305.4.6. Adjustment of analogue output 2
326. Operation ...............................................................................................................................
326.1. Operation mode Off
326.2. Operation mode Local
326.2.1. Push-to-run operation or self-retaining Local
336.3. Operation mode remote
336.3.1. Push-to-run operation or self-retaining Remote
346.4. Operation mode EMERGENCY
346.5. Operation mode EMERGENCY stop
356.6. Operation mode Disabled
356.7. Operation mode Service
367. Basic settings for commissioning........................................................................................
367.1. Type of seating for end positions
367.1.1. Type of seating: set
377.2. Torque switching
387.2.1. Torque switching: set
397.3. Limit switching
397.3.1. Limit switching: set
417.3.2. End position setting via stroke
447.4. Date and time
447.5. Display formats
447.5.1. Date format
457.5.2. Time format
457.5.3. Number format
457.5.4. Torque unit
457.5.5. Temperature unit
457.5.6. Position units
467.5.7. Process factor units
477.5.8. Analogue working value units (AIN)
477.5.9. Analogue signal output units (AOUT)
487.6. Contrast
498. Application functions.............................................................................................................
498.1. Speed functions
498.1.1. Speed source for local operation and remote operation
508.1.2. Speed for constant (internal) speed setpoint: set
518.1.3. Speed range for analogue input: set
518.1.4. Time for speed increase and time for speed reduction at pivot points
528.1.5. Speed reduction before reaching end positions OPEN/CLOSED (soft stop in end posi-
tions)
538.2. Speed profile
538.2.1. Speed profile: activate
548.2.2. Operation mode for speed profile: set
548.2.3. Pivot points for speed profile: define
568.3. Intermediate positions
578.3.1. Intermediate positions of pivot points: define
3
Actuator controls
ACV 01.2/ACVExC 01.2 Profibus DP Table of contents

AUMA SQV 05.2 Specifications

General

Brand	AUMA
Model	SQV 05.2
Category	Controller
Language	English