Auriol Z29962C - Setting the Alarm; Alarm On;Off Control

17 GB/IE
Q
Setting the alarm
j Press and hold the ALARM button
13
for approx.
3 seconds.
Note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with AL. Otherwise 0:00 and AL are displayed.
j Press the ALARM button
13
briefly. The hours
start to flash.
j Press the ADJUST button
12
to set the required
number.
j Press the ALARM button
13
to confirm your
entry. The minutes start to flash.
j Press the ADJUST button
12
to set the required
number.
j Press the ALARM button,
13
to confirm your
entry.
j The LCD returns to the standard display (Time
9
).
Q
Switching the alarm on / off
j Press and hold the ALARM button
13
for approx.
3 seconds. The set alarm time appears on the LCD.
j Press the ADJUST button
12
to switch the alarm
on or off.
Note: when the alarm is switched on,
is
displayed above AL.
Note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
j The alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY
11
,
ADJUST
12
, ALARM
13
or CLOCK
14
, to
switch the alarm signal off within this time.
Note: the alarm rings every day at the set time.