Auriol Z29962C - Memory Function for Min;Max Levels; Displaying Maximum and Minimum Levels

20 GB/IE
= the weather is improving
Q
Setting the memory function
for minimum / maximum levels
j Press and hold the ADJUST button
12
for approx.
3 seconds. Either the °C or °F display starts to
flash.
j Press the CLOCK button
14
twice. - - starts to
flash.
j Press the ADJUST button
12
to set the required
memory interval.
The following intervals are available:
- - = general minimum / maximum levels
1d = daily minimum / maximum levels
7d = weekly minimum / maximum levels
j Press the MEMORY button
11
to confirm your
entry.
Note: if no button is pressed in a space of
approx. 30 seconds, the LCD returns to the
standard display.
Q
Displaying the maximum /
minimum levels
Note: depending on the memory interval setting,
the LCD displays either the general, daily or weekly
minimum / maximum levels.
j Press the MEMORY button
11
once to display
the maximum
4
and minimum
6
levels for
the indoor temperature (IN) and the maximum
levels for humidity
3
.
j Press the MEMORY button
11
again to display
the maximum
4
and minimum
6
levels for the
outdoor temperature (OUT) and the minimum
levels for the humidity
3
.