Auriol Z29962C - Time Zone Setting; Changing the Batteries

22 GB/IE
Note: if no button is pressed in the space of
approx. 30 seconds, the LCD returns to the
standard display.
Q
Setting the time zone
Your weather station receives the DCF 77 signal from
Frankfurt and is preset to Greenwich Mean Time.
j Press and hold the ADJUST button
12
for approx.
3 seconds. The °C or °F display starts to flash.
j Press the CLOCK button
14
five times. +0
flashes.
j Press the ADJUST button
12
to set the chosen
time zone (-2 hours to +2 hours).
Note: if you are in a country where it is possible
to receive the DCF signal but which has a time
difference, you can use the time zone setting to
set the clock to the current local time. For example,
if you are in a country where the local time is an
hour ahead of Central European Time (CET),
you set the time zone to + 01. The clock is still
controlled by the DCF signal but one hour is
added onto the time.
j Press the MEMORY button
11
to confirm your
entry.
Note: if no button is pressed in a space of
approx. 30 seconds, the LCD returns to the
standard display.
Q
Changing the batteries
You should change the batteries when the LCD
becomes faint and / or the signal to the external
sensor is interrupted.