18 GB/IE
Q
Using the snooze function
j Press the Z
Z
/ REGISTER button
10
when the
alarm is ringing to activate the snooze function.
j The alarm signal silences and the Z
Z
display
flashes. The alarm signal sounds again after an
interval of 5 minutes.
Note: the alarm rings every day at the set time.
Q
Temperature display
The LCD indicates both the current indoor
5
and
outdoor temperature
7
.
j Press and hold the ADJUST button
12
for approx.
3 seconds. The °C display starts to flash.
j Press the ADJUST button
12
to switch between
the °C and °F temperature scales.
j Press the MEMORY button
11
to confirm your
entry.
Q
Humidity display
The current humidity
3
is displayed on the LCD.
The comfort indicator
2
divides the humidity into
three categories.
The displays have the following meaning:
WET = humidity
3
> 70 %
COMFORT = humidity
3
40 – 70 %,
DRY = humidity
3
< 40 %
Q
Setting up the weather
forecast function
Note: please also listen to the weather forecast from
your local weather service. If there are discrepancies
between the instrument and your local weather service,
please go by the local weather service forecast.
To Next Page
Loading...
