23
CH 200 / CH 250
Safety
(fig. 5)(fig. 6)(fig. 7)
Before starting and operating the forklift
·
Stay alert. Concentrate fully on your work. Your safety and that of others depends on the care
you take when operating this forklift.
·
Remember that you are the key to safety. Good safety practices not only protect you but also
the people around you.
·
Never start or operate any of the controls unless seated in the driver’s seat.
·
Sudden braking or accelerating or fast movements of the forks causes instability and danger
of overturning.
·
This forklift was designed to lift loads not people. Never transport people on any part
of the forklift. Do not let people ride on the forks. (Fig,5)
·
Do not drive rapidly. Driving too fast is dangerous to the driver and to the load. The speed at
which the forklift is operated should always be suited to the working conditions and to the space
available for maneuvering.
·
Always drive smoothly and not in a jerky fashion.
·
Never put any part of your body between the fork mast and the forklift body.(fig.6-7)
·
Be careful around any load edges, pressure zones or revolving movements and extensions.
To Next Page
Loading...
