5 English
• The chimney must be designed according to the technical data of the stove (Technical data in
this manual).
• The horizontal length of the flue pipe should not exceed 2.5 m.
• The flue pipe must have no more than three 90° elbows. Each elbow should have a tight cleaning
aperture.
• The chimney must be resistant to condensation.
• To ensure your pellet stove operates correctly, a chimney draught of 3 Pa - 12 Pa is stipulated.
• Austroflamm pellet stoves are approved by the manufacturer for chimneys with multiple occu-
pancy. In such a case, national, regional and local regulations must be complied with.
To Next Page
Loading...
