Austroflamm Clou - Commissioning report

English 30
14 COMMISSIONING REPORT
Operator/Customer
Retailer/Installer
Name
Company
Street
Street
Postcode Town/City
Postcode Town/City
Telephone
Telephone
Email
Email
Pellet stove
MODEL
Serial number
Technical defects
Visual defects
Accessories
On-site conditions
Firebox door seal inspected
Number of deflectors:
Total length of the flue pipes:
Other
Flue pipes in plug-in system □ with sealing lip □ without seal-
ing lip
Chimney type □ brick □ stainless steel □ fireclay
Sea level:
Diameter of chimney: Height of chimney:
Chimney draught – Actual value: Target value: 12 Pa
Chimney – Approved by chimney sweep: □ yes □ no
Flue pipe diameter:
Controlled domestic ventilation: □ yes □ no
Outside temperature during draught measurement:
Appliance - preparation for start and function test
Pellet hopper full
Pellet quality: e.g. ENplus A1
"Riddling grate" function tested
Keramott fired “white“
Instructions for the operator/customer
Handling of the appliance explained intelligibly
Cleaning and maintenance interval explained
Terms and conditions of the guarantee and warranty
explained
Photographic documentation of the CURRENT state of
the "pellet stove installation"
(Please be sure to obtain the customer's consent beforehand! )
Glove □ Operating instructions □
Testing the heating function of the appliance to-
gether with the customer (start, combustion and
burnout phases completed)
The end customer hereby confirms that he/she can now put the stove into operation without assistance. He/she
further confirms that the pellet stove has been handed over in a fully functional state and is free of defects.
------------------ --------------------------- -----------------------------------
Place, Date Signature of operator/customer Signature of installer
Austroflamm GmbH, Austroflamm-Platz 1, 4631 Krenglbach, Austria, Tel. 0043/7249/46443,
info@Austroflamm.com
Status 03/2021