Need help?Do you have a question about the Austroflamm Clou and is the answer not in the manual?
General| Brand | Austroflamm |
|---|---|
| Model | Clou |
| Category | Pellet stove |
| Language | English |
Details the requirement and connection of external combustion air for optimal stove operation.
Guidelines for connecting the pellet stove to a chimney, adhering to regulations.
Details the essential first-time setup procedures performed by a service engineer.
Explains how date and time are set for proper stove function and logging.
Visual guide to the different status indicators and flame signals on the control panel.
Step-by-step instructions for starting the stove using the dialing knob.
How to select and adjust the heat output from 1 to 5 levels.
Guide to setting the desired room temperature for automatic climate control.
How to respond to the alarm indicating low pellet levels.
Notification that scheduled maintenance is required for the stove.
Indicates the internal control unit battery needs replacement.
Alarm triggered if the pellet hopper lid remains open too long.
Instructions for vacuuming the firebox and burn pot for optimal combustion.
Steps for cleaning the internal flue gas pathways for efficient operation.
Electrical diagram specific to models with a permanently rotating feeder motor.
Specific wiring diagram for the power splitter component.
To Next Page
