COMMISSIONING REPORT FOR "PELLET STOVE"
Operator/Customer Retailer/Technician
Name Company
Street
Street
Postcode Town/City
Postcode Town/City
Telephone Telephone
Email
Email
Pellet Stove
MODEL Software version control unit
Serial number
Technical defects Software version WLAN box
Visual defects WLAN module □ Yes □ No
: SMART SPOT, AIR DISTRIBUTION
… )
On-Site Conditions
Socket earthed (see test certificate for electrical
installation)
Number of deflectors:
Firebox door seal inspected
Total length of the flue pipes:
Miscellaneous
Flue pipes in plug-in system
□ with sealing lip □ without sealing
lip
Chimney type □ Brick □ Stainless steel □ Fireclay Sea level:
Diameter of chimney: Height of chimney: Chimney draught – Actual value: Target value: 3–12 Pa
Chimney – Approved by chimney sweep: □ Yes □ No Diameter of the flue pipe:
Controlled domestic ventilation: □ Yes □ No Outside temperature during draught measurement:
Appliance - Preparation for Start, Function Test
Pellet hopper full Function of "induced draught fan" tested
Pellet quality : e.g. Önorm/DIN plus/ENplus A1
Function of "worm gear motor" tested
"Riddling grate" function tested Function of "ignition cartridge" tested
Keramott "fired white“ Partial load test carried out
Instructions for the Operator/Customer
Handling of the appliance explained intelligibly Cleaning and maintenance interval explained
Warranty terms and conditions, and coverage explained
Photographic documentation of the CURRENT state of the
"pellet stove installation"
(Please be sure to obtain the customer's consent beforehand!)
Wire brush □ Glove □ Operating Manual □
Trial heating of the appliance and switching it off jointly with
the customer.
The end customer hereby confirms that he/she can now put the stove into operation without assistance. He/she further
confirms that the pellet stove has been handed over in a fully functional state and is free of defects.
------------------ --------------------------- -----------------------------------------
Location, date Signature of Operator/Customer Signature of Technician
Austroflamm GmbH, Austroflamm Platz 1, 4631 Krenglbach, Austria, Tel. 0043/7249/46443, info@austroflamm.com
02/2021