9. Disposal
To comply with European Directive 2002/96/EC on waste Electrical and Electronic Equipment and its
implementation as national law, electrical equipment that has reached the end of its life must be collected
separately and returned to an approved recycling facility. Ignoring this EU Directive may have severe effects on
the environment and your health.
10. Troubleshooting
10.1 General
Check that all switches are in the ON position (including internal DC switch if present)
Check AC and DC power supply. If DC power is greater than 10W and string voltage
greater than 100V the inverter should start.
If switches are on and AC and DC power supplies are available please contact installer.
10.2 Internal component fault
1. Restart inverter (up to three times).
2. If error persists contact installer for
replacement inverter.
To Next Page
Loading...
General