installation and operation manual
1. Introduction
1.1 Read this first
This manual contains important information for use during installation and maintenance of the MX-series
Autarco inverter.
To reduce the risk of electrical shock, and to ensure the safe installation and operation of the MX-series Autarco
inverters, the following safety symbols appear throughout this document to indicate dangerous conditions and
important safety instructions.
WARNING! Indicates safety instruction, which if not correctly followed, can result in injury or
property damages.
RISK OF ELECTRIC SHOCK! Indicates safety instructions, which if not correctly followed, could
result in electric shock.
HOT SURFACE! Indicates safety instructions, which if not correctly followed, could result in burns.
1.2 Target Audience
This manual is intended for anyone who uses Autarco MX-series inverter. Before any further action, the
operators must first read all safety regulations and be aware of the potential danger to operate high-voltage
devices. Operators must also have a complete understanding of this device’s features and functions.
ATTENTION! Qualified personnel means a person with valid license from the local authority in:
Installing electrical equipment and PV power systems (up to 1000 V).
Applying all applicable installation codes and using Personal Protective Equipment.
Analyzing and reducing the hazards involved in performing electrical work.
WARNING! Do not use this product unless it has been successfully installed by qualified personnel
in accordance with the instructions in chapter 4 “Installation”.
To Next Page
Loading...
General