Page 6 3 - LK Transmitting Unit LILKNPA1-01 - AmEn.fm
The number of pushbuttons in the LK transmitting unit varies depending on its configura-
tion.
The receiving units of the Light series are equipped with a safety function called
SAFETY that protects the system “machine+radio remote control”, when it is in neu
-
tral (rest) position, from unintended movements caused by possible radio remote
control faults. For this to happen, both the wiring instructions in the technical data
sheet and the prescriptions for correct installation.
3.1 TECHNICAL DATA OF THE LK TRANSMITTING UNIT
Climatic conditions
TEMPERATURE
RELATIVE
HUMIDITY
AIR PRESSURE
WORKING
Class 4K4H
-5°F to +130°F
(-20°C to +55°C)
Class 4K4H
4% to 100%
Class 4K4H
86 kPa to 106 kPa
STORAGE
Class 1K5
-40°F to +160°F
(-40°C to +70°C)
Class 1K3
5% to 95%
Class 1K4
86 kPa to 106 kPa
TRANSPOR-
TATION
Class 2K3
-13°F to + 160°F
(-25°C to +70°C)
Class 2K3
95%
Class 2K3
70 kPa to 106 kPa
Power supply (battery pack LBM02MH)
*
................................................. NiMH 2.4 Vdc
Antenna.............................................................................................................. internal
Output power.......................................... meets FCC Part 15 for license-free operation
Housing ...................................................................................................PA 66 (50% fg)
Protection degree.................................................................................... NEMA 4 [IP65]
Dimensions ..................................................... (3.1’’ x 7.3’’ x 1.7’’) [(80 x 185 x 43)mm]
Weight ....................................................................................................14.8 oz (420 g)
Battery capacity with fully charged battery [at 68°F (20°C)].......................... ~ 12 hours
“Low battery” warning......................................................................................... 3.5 min
* refer to battery technical data in the battery charger manual.