auto maskin DCU 305 R3 User Manual

Page 11 (20)
The menu options
The menu is accessed by pressing the menu button.
MENU
> INFORMATION
EVENT LOG
LAMP TEST
CONTRAST INCREASE
CONTRAST DECREASE
LOCAL MODE
RPM TEST
CAN STATUS/RESTART
SERVICE DONE
DIAGNOSTIC DISPLAY
EXIT
DCU 305 R3 menu view – cursor at INFORMATION.
To enter the different views or functions from the menu, use the up- or
down arrow button to place the cursor in front of the desired view, press
menu button to select.
Accessing views
Four different views can be accessed from the menu. These are:
 Information view described on page 9.
 Event log view described on page 10.
 CAN status/restart view described on page 10.
 Diagnostic display view described on page 10
Lamp test
Press the menu button to access the menu view. Use up or down buttons
to place the cursor in front of LAMP TEST. Press the menu button.
Twelve LEDs should be lit for as long as the menu button is pressed.
Adjusting contrast
The control unit uses a graphical Liquid Crystal Display.
The optical performance of the display changes with temperature, light
conditions and age.
There is a built-in compensation for temperature changes. Still, from time
to time, it may be necessary to adjust the display.
If the display seems dim or unclear, adjust the display as follows:
 Use the up- or down arrow button to place the cursor in front of
CONTRAST+ for brighter or CONTRAST- for darker display.
 Press the menu button numerous times until desired contrast on
the display is obtained.

auto maskin DCU 305 R3 Specifications

General

Brand	auto maskin
Model	DCU 305 R3
Category	Control Unit
Language	English