29
These screens show the results the BCT Tester
will return after a battery test. The information shown is test
number, measured capacity, rated capacity, the state of health
and the battery’s initial voltage. All tests are saved internally in
the BCT Tester.
INDIVIDUAL TESTS (BATTERY TEST)
The battery passed the test and
can be returned to service.
If the engine is running the
charging system will affect the
battery test. The BCT Tester
will detect that and prompt you
to shut off the engine before
running the battery test.
If there is a connection issue the
following screen will appear.
Check the connections and make
sure the battery post and clamps
are clear of any corrosion.
The BCT Tester will display the
progress of the battery test
When the Measure Battery Temp
area is pressed. The
temperature probe screen is
activated. Aim the probe at the
battery from a distance of 4 to 6
inches. Press save to store the
temperature reading and go back
to the Battery Test screen.
When the Select Battery Type
area is pressed, the battery type can
be selected. Press the battery type
you are testing and the unit will go
back to the Battery Test screen. The
battery types the BCT Tester can
test are Starting Standard, Starting
AGM, and AMG Pure Lead.
To Next Page
Loading...
