Auto Meter BVA-360 User Manual

18 11
BATTERY TEST
Touch the
"Battery Test"
Button.
Here you will
enter the CCA
number found
on the battery,
then touch the
green check
mark.
If a battery does
not have a CCA
rating touch
the CCA box
to display this
menu to change
the battery
rating.
Enter CCA by
touching the
blank box to the
left of CCA.
2
FULL SYSTEM TEST
This screen will
appear for up
to 30 seconds,
and then will
automatically
test the charging
system.
Here you have
the summary of
test results. You
may also touch
the print button
at the bottom left
to print the test
results. (Printing
available on
BVA-360P
version only).
This is an
example of a
system that
has passed
the charging
system test.
Touch the green
“Proceed to
Test Summary”
button.
Example of
Printed Results
5
• At the end of the Full System test, or an Individual Test, if you have the
BVA-360P version, you have the option to Print the test results.
• To Print, touch the Print Button, and the results will print as shown in the
picture above.

Auto Meter BVA-360 Specifications

General

Brand	Auto Meter
Model	BVA-360
Category	Test Equipment
Language	English