AUTOHELM ST50 Wind Trim - 3. Fault finding

12
3. Fault finding
5T5O WindTrim and 5peedTrim Operation and Installation Handbook
5T5O WindTrim and 5peedTrim Operation and Installation Handbook
Pack Contents
5
All Autohelm products are subject to a comprehensive test procedure
prior to packing and shipment. In the unlikely event that a fault does arise
the following check list should help cure the problem.
The following items are included in the ST50 WindT rimjSpeedT rim packs.
1. Power loom 5. Fixing studs
Fault
Digital and analogue
display not working.
No exchange of
information between
SeaTalk instruments.
(i.e. illumination levels)
Failure of a group of
instruments in the
SeaTalk chain.
Cause
No supply.
Action
Check Cabling and security
of Sea Talk connectors.
Return Instrument for
repair.
Check security of SeaT alk
Connectors 0
Remove instruments one by
one to isolate faulty unit.
Check security of Sea Talk
Connectors between
functioning and non
functioning units.
2. Instrument head
3. Protective cover
4. Handbook
J
I.
\ •••. 0 '. /
.' 5 'I" 5'.
"":'10 10
;'15 15
- ru +
lOCK""- ~ /V"
[g)*~ EJ
6. Fixing nuts
7. Dealer list
8. Warranty booklet
Autohelm
WINDTRIM
AND SPEEDTRIM
Operation and
Installation
-3
...--------4
r-
5
•'"1""""1"""1". I§
Autohelm
WORLDWIDE
SERVICE CENTRES
..
6
2
Autohelm
WARRANTY
TermsandCondlllons
010401