To Next PageTo Next PageWhat to do if Automatic Technology Australia Garage Door Opener does not open fully?
If your Automatic Technology Australia Garage Door Opener isn't opening fully, the door limit positions likely need to be reset.
Why Automatic Technology Australia Garage Door Opener globe keeps blowing?
If the globe in your Automatic Technology Australia Garage Door Opener keeps blowing, it's likely due to an incorrect globe voltage. Ensure you are using a 24V DC globe and replace it with a festoon type 15W 24V DC globe.
Critical warnings for safe operation, children supervision, and force testing.
Details on opening, stopping, auto-close, vacation, and pet modes.
Explains ALPS for limits and ISS for safety obstruction.
Covers Hopping Code, Security Code Store, and Auto Courtesy Light.
Explains buttons like Door Code, Light Code, Set, and LEDs on the control panel.
Details RX Input, Prog Input, O/S/C Input, and Motor Connector functions.
Covers Engage/Disengagement Cord, Force Margin Set, and Auto Close Time.
Lists the drive unit, transmitters, batteries, hardware, and installation manual.
Safety warnings and side room clearance for installation.
Ensuring the door is balanced and operates smoothly before opener installation.
Fixing weight bars and setting opener for left/right hand installation.
Instructions for removing and replacing the transmitter battery.
Steps for attaching the drive assembly to the door axle and drum.
Warnings and steps for adjusting manual release cord and final checks.
How to fix the door curtain to the drum wheel using screws.
Procedure for setting door travel limits using the control panel.
Steps to delete existing door limit positions.
Procedure for setting door travel limits using the remote control.
Steps to delete existing door limit positions.
Testing door obstruction response during close and open cycles.
Instructions to increase, decrease, or recall factory settings for force margin.
How to program transmitters for door, light, pet, and vacation modes.
Method for coding transmitters without direct access to the opener.
Procedures for deleting individual or all stored transmitter codes.
Instructions for fitting protective covers to the door guides.
Guide for installing the optional safety photo electric beam sensor.
Procedure to set the delay time for the automatic door closing feature.
How to switch the opener to manual mode for power outages.
Adjusting courtesy light time and setting the pet mode opening position.
Instructions for mounting the transmitter holder.
Procedure to reset and re-initialise the opener for operation.
Explanation of the meaning of door opener status LEDs.
Table detailing the function of each control panel button.
Table of default operational parameters like run time and force margin.
Detailed technical data including voltage, load, and receiver type.
Table listing common symptoms, causes, and remedies for opener issues.
List of all available spare parts with item numbers and order codes.
Details the product warranty period, conditions, and excluded liabilities.
General| Type | Roller Door Opener |
|---|---|
| Motor Type | DC Motor |
| Input Voltage | 240V AC |
| Motor Voltage | 24V DC |
| Maximum Door Weight | 100kg |
| Max Door Weight | 100kg |
| Maximum Door Width | 5.5m |
| Remote Control | Yes |
| LED Lighting | Yes |
| Operating Temperature | -20°C to +50°C |
| Radio Frequency | 433.92 MHz |
| Remote Controls | 2 |
| Safety Features | Obstruction Detection |
