Automatic Technology SecuraLift Rhino - Installation and Setup; Package Contents

10
SecuraLift® Rhino Installation Instructions & Owner’s Manual
Package contents
Drive Unit
1 x SecuraLift
®
Rhino drive unit (Fig. 01)
1 x Transmitter pack (Fig. 01)
(Pack includes two keyring transmitters and batteries)
1 x Wall mount transmitter with battery
2 x Door attachment arms (Fig. 01)
1 x Accessory and hardware pack (Fig. 01)
1 x Manual Disengagement Cord (Fig. 01)
1 x Installation Manual
Three Piece Knockdown Track With
Pre-Assembled Chain
IMPORTANT NOTE: If a modifi cation to the length of the
track is required, the adjustment must be made from the
drive unit end only.
Single Piece Track With Pre-Assembled
Chain
NOTE: Chain in one piece rail has been tensioned by the
factory. Do not adjust the tension of the chain.
IMPORTANT NOTE: If a modifi cation to the length of the
track is required, the adjustment must be made from the
drive unit end only.
OR
PLUS
01
Fig
02
Fig
03
Fig