Autonics FXY Series Instruction Manual

M-67
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(J)
Temperature
Controllers
(K)
SSRs
(L)
Power
Controllers
(M)
Counters
(N)
Timers
(O)
Digital
Panel Meters
(P)
Indicators
(Q)
Converters
(R)
Digital
Display Units
(S)
Sensor
Controllers
(T)
Switching
Mode Power
Supplies
(U)
Recorders
(V)
HMIs
(W)
Panel PC
(X)
Field Network
Devices
FXY Series
Specications
Features
DIN W72×H36mm Of Counter/Timer With Indication Only
Models
Model Indicator
FX4Y-I2 FX4Y-I4 FX6Y-I2 FX6Y-I4
Display digit 4-digit 6-digit
Character size (W×H) 8×14mm 4×8mm
Power supply
24VAC
ᜠ
50/60Hz,
24-48VDC
ᜡ
100-240VAC
ᜠ
50/60Hz
24VAC
ᜠ
50/60Hz,
24-48VDC
ᜡ
100-240VAC
ᜠ
50/60Hz
Permissible voltage range 90 to 110% of rated voltage
Power consumption
Max. 2.8VA
(24VAC
ᜠ
50/60Hz),
Max. 1.8W (24-48VDC
ᜡ
)
Max. 3.8VA
(240VAC
ᜠ
50/60Hz)
Max. 2.8VA
(24VAC
ᜠ
50/60Hz),
Max. 1.8W (24-48VDC
ᜡ
)
Max. 3.8VA
(240VAC
ᜠ
50/60Hz)
Max. counting speed of CP1/CP2 Selectable 1cps / 30cps / 2kcps / 5kcps (DIP switch)
Return time Max. 500ms
Min. signal width INHIBIT, RESET: approx. 20ms
Input method
Selectable voltage input (PNP) method or no-voltage input (NPN) method
[Voltage input (PNP) method]-input impedance: max. 10.8kΩ, [H]: 5-30VDC
ᜡ
, [L]:0-2VDC
ᜡ
[No-voltage input (NPN) method]-short-circuit impedance: max. 470Ω, short-circuit residual voltage: max. 1VDC
ᜡ
,
open-circuit impedance: min. 100kΩ
Repeat/Set/Voltage/Temp. error Max. ±0.01% ±0.05 sec
Insulation resistance Over 100MΩ (at 500VDC megger)
External power supply Max. 12VDC
ᜡ
±10% 50mA
Memory retention Approx. 10 years (non-volatile memory)
Dielectric strength 2,000VAC 50/60Hz for 1 min (between all terminals and case)
Noise
immunity
AC voltage ±2kV the square wave noise (pulse width 1
㎲
) by noise simulator
AC/DC voltage ±500V the square wave noise (pulse width 1
㎲
) by noise simulator
Vibration
Mechanical 0.75mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 1 hour
Malfunction 0.5mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 min
Shock
Mechanical 300m/s
2
(approx. 30G) in each X, Y, Z direction for 3 times
Malfunction 100m/s
2
(approx. 10G) in each X, Y, Z direction for 3 times
Environment
Ambient temp. -10 to 55
℃
, storage: -25 to 65
℃
Ambient humi. 35 to 85%RH, storage: 35 to 85%RH
Protection structure IP40 (front part, IEC standard)
Approval
Weight
※
1
Approx. 175g (approx. 120g)
※
1: The weight includes packaging. The weight in parenthesis is for unit only.
※
Environment resistance is rated at no freezing or condensation.
● Counting speed: 1cps / 30cps / 2kcps / 5kcps
● Selectable voltage input (PNP) method or
no-voltage input (NPN) method
● Input mode: Up, Down, Up/Down
● Dot for Decimal Point / Hour. Min. Second by RESET key
● Wide range of input power supply
: 100-240VAC 50/60Hz,
24VAC 50/60Hz, 24-48VDC universal
● Selectable Counter or Timer function by internal DIP switch
● Changed case color (ivory → black)
● [Counter]
20 input modes
● [Timer]
Various time setting range-6-digit model: 0.01 sec to 99999.9 hour /
4-digit model: 0.01 sec to 9999 hour
● Output: Indicator
Model Display digit Size Output Power supply
FX4Y-I2
9999 (4-digit)
DIN W72×H36mm Indicator
24VAC 50/60Hz, 24-48VDC
FX4Y-I4 100-240VAC 50/60Hz
FX6Y-I2
999999 (6-digit)
24VAC 50/60Hz, 24-48VDC
FX6Y-I4 100-240VAC 50/60Hz
Please read “Safety Considerations”
in the instruction manual before using.

Autonics FXY Series Specifications

General

Brand	Autonics
Model	FXY Series
Category	Timer
Language	English