Need help?Do you have a question about the Autonics TC3YT-B4R3 and is the answer not in the manual?
General| Brand | Autonics |
|---|---|
| Model | TC3YT-B4R3 |
| Category | Temperature Controller |
| Language | English |
Details the breakdown of the model number for selection.
Covers power supply, input type, control method, and output types.
Details sampling period, hysteresis, and control period.
Includes relay life, vibration, temperature, and humidity resistance.
Illustrates the wiring terminals for input, output, and power.
Identifies the displays, indicators, and buttons on the controller's front.
Describes the initial display state when the unit is powered on.
Explains the step-by-step process to check and modify setting values.
Details supported sensor types and their input temperature ranges.
Lists the default values for key parameters like proportional band and hysteresis.
Covers advanced settings such as temperature units and error output options.
Explains how to precisely measure and correct sensor input deviations.
Describes the purpose of hysteresis in preventing hunting in ON/OFF control.
Details proportional band and control interval for proportional control.
Explains offset correction and manual reset for stable proportional control.
Covers switching between ON/OFF and proportional control modes.
Describes setting high and low temperature limits for operational range.
Lists and explains error codes and their corresponding issues during operation.
Defines how the control output behaves when an error condition occurs.
Explains how to lock parameters to prevent accidental modification.
Specifies suitable conditions regarding altitude, pollution, and category.
Provides critical safety guidelines for power supply, circuit breakers, and wiring.
To Next Page