Need help?Do you have a question about the Autonics TK4W and is the answer not in the manual?
General| Model | TK4W |
|---|---|
| Mounting | Panel mount |
| Input Type | Thermocouple, RTD |
| Control Output | Relay, Current, SSR drive |
| Control Method | On-Off Control, PID Control |
| Display Type | Dual digital display |
| Temperature Range | Depends on the input type |
| Power Supply | AC 100~240V, 50/60Hz |
Lists key features of the TK series temperature controller.
Details the main unit, brackets, and optional accessories.
Explains the model designation and its components.
Identifies and describes the unit's displays and control buttons.
Lists electrical and operational ratings for different TK series models.
Provides mechanical dimensions for TK series models (S, SP, M, H, W, L).
Explains mounting procedure and details available terminal covers.
Illustrates terminal wiring for TK series controllers (S, SP, M, W, H, L).
Lists critical precautions to follow during wiring.
Details precautions for sensor and communication line wiring.
Explains the sequence of displays upon powering on the unit.
Describes input selection switch and fundamental operations like parameter setting.
Details the procedure for setting SV and changing parameter settings.
Details input types, ranges, scaling, bias, and filters.
Explains control output modes (heating, cooling) and MV limits.
Explains switching control modes and the auto-tuning process.
Details alarm modes, options, SV settings, hysteresis, and delay.
Configures communication parameters like BPS, parity, and unit address.
Covers monitoring, run/stop, multi SV, digital inputs, and error features.
Covers user levels, parameter locking, initialization, and password protection.
To Next Page
