Autonics TK4W - Temperature Control; Temperature Control Mode [PAR3 → C-MD]

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 69
6.2.5.3 Current Output Range Settings [PAR3 → O!MA/O@MA]
If the control output is set to current output, you can select upper and lower limit range for
the current output as either 4-20 mA or 0-20 mA.
Parameter Description
O1.MA
Sets OUT1's current output range.
O2.MA
Sets OUT2's current output range.
This parameter is only available on models supporting current output
(
OUT1
,
OUT2
).
6.3 Temperature Control
6.3.1 Temperature Control Mode [PAR3 → C-MD]
You can choose the type of temperature control method.
Setting
Description
Heating Cooling
Standard
Control
PID
PID Control
ONOF
ON/OFF Control
Heating and
Cooling
Control
P.P
PID Control PID Control
P.ON
PID Control ON/OFF Control
ON.P
ON/OFF Control PID Control
OnON
ON/OFF Control ON/OFF Control
Setting
Group
Paramet
er
Setting Range
Factory
Default
Unit
PAR3
C-MD
Standard
Control
PID
/
ONOF
PID
-
Heating and
Cooling
Control
P.P
/
P.ON
/
ON.P
/
ON.ON
P.P