Autonics TK4W User Manual

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 105
6.7.7.2 Parameter Group Lock [PAR5 → LC.P1/LC.P2/LC.P3/LC.P 4/LC.P5]
 Lock or unlock individual parameter groups from PAR1 (Parameter 1) to PAR5
(Parameter 5).
 Even with parameter group lock in place, you can still read parameter settings.
In Parameter 5's (PAR5) case, the settings can still be modified even with a lock
(
LC.SV/LC.P□) initiated.
Parameter Parameter Description
ON
Activates parameter group lock.
OFF
Deactivates parameter group lock.
Parameter Parameter Description
LC.P1
Activates Parameter 1 lock.
LC.P2
Activates Parameter 2 lock.
LC.P3
Activates Parameter 3 lock.
LC.P4
Activates Parameter 4 lock.
LC.P5
Activates Parameter 5 lock.
Setting
Group
Parameter Setting Range
Factory
Default
Unit
PAR5
LC.P1
ON
/
OFF
OFF
-
LC.P2
OFF
LC.P3
OFF
LC.P4
OFF
LC.P5
OFF
6.7.8 Parameter Initialization[INIT]
 This function is to reset all parameters in memory to factory defaults.
 Press and hold the front panel's ◀, ▼, and ▲ keys for five seconds. The INIT
parameter will be displayed. Select YES to reset the parameters.
Setting
Group
Parameter Setting Range
Factory
Default
Unit
-
INIT
YES
/
NO
NO
-
‘
If the password feature is activated, it is required to enter a password to
activate this function. Resetting the parameters also resets the password.

Autonics TK4W Specifications

General

Brand	Autonics
Model	TK4W
Category	Temperature Controller
Language	English