Need help?Do you have a question about the Autonics TK Series and is the answer not in the manual?
General| Brand | Autonics |
|---|---|
| Model | TK Series |
| Category | Temperature Controller |
| Language | English |
Details the advanced capabilities, high-speed sampling, and diverse control modes of the TK Series.
Lists all included product parts and optional accessories required for setup and operation.
Provides product codes, options, and specifications for ordering the correct TK Series model.
Identifies and explains the function of each physical component and display element.
Highlights critical safety guidelines and best practices for electrical connections to prevent damage.
Provides specific instructions for connecting temperature sensors and analog input signals correctly.
Details the proper method for establishing communication links, such as RS485, for data transfer.
Explains the sequence of displays and modes shown upon initial power-up of the controller.
Covers fundamental operations like accessing parameter groups and setting values.
Describes how to monitor and manually adjust the control output (Manipulated Variable).
Outlines the hierarchical organization and navigation flow of controller parameters.
Details the specific parameters and their functions within each parameter group (PAR1 to PAR5).
Configures input types, ranges, scaling, and correction for sensors and analog signals.
Configures output modes such as heating, cooling, SSR, and current output for the controller.
Defines control methods like ON/OFF, PID, auto-tuning, and hysteresis for temperature regulation.
Configures alarm conditions, types, hysteresis, delay, and output options for monitoring events.
Configures communication parameters like address, BPS, parity, stop bits, and response time.
Covers monitoring, RUN/STOP, multi SV, digital input, error handling, and lock settings.
Details parameters related to Set Value (SV) and digital input key execution.
Details parameters for monitoring and manually adjusting the Manipulated Variable (MV).
Lists and describes parameters found in the PAR1 group, including alarms and SV settings.
Lists and describes parameters found in the PAR2 group, including tuning and ramp settings.
Lists and describes parameters found in the PAR3 group, covering input, output, and control modes.
Lists and describes parameters found in the PAR4 group, mainly for alarm and communication settings.
Lists and describes parameters found in the PAR5 group, including digital input and security settings.
Details the procedure for entering passwords to access or protect controller settings.
Explains how parameters reset to default values under specific conditions or operations.
Introduces DAQMaster as a comprehensive device management and monitoring software.
Highlights key functionalities like database management, real-time logging, and device support.
Describes software features tailored for TK Series, like parameter masking and user groups.
Explains how to hide or show parameters to customize the user interface via DAQMaster.
Details creating and managing custom parameter groups for quick access and configuration through DAQMaster.
To Next Page
