Autonics TK Series User Manual

6 Parameter Settings and Functions
60 © Copyright Reserved Autonics Co., Ltd.
6.1.7 High/Low-limit value of setting value(SV) [PAR3 → H-SV/ L-SV]
You can limit the Set value(SV) range within the temperature range of the temperature sensor or
analog input type in order to prevent the system from controlling with improper SV.
Setting
group
Parameter Setting range Factory default Unit
PAR3
H-SV
SV low-limit + 1 digit to sensor
input high-limit or analog high-
limit scale value
1350(temperature)
℃/℉
00)0(analog)
L-SV
Sensor low-limit or analog low-
limit scale value to SV high-limit -
1 digit
-200(temperature)
℃/℉
10)0(analog)
Parameter
Parameter Description
L-SV
Set value(SV) low-limit
H-SV Set value(SV) high-limit
Attempts to set the limits outside the min/max input range, or analog's high/low-limits, are not
accepted. Instead, the previous settings are retained.
Set value(SV) can only be set within the SV low-limit [L-SV] and SV high-limit [H-SV] range.
SV lower-limit [L-SV] cannot exceed SV high-limit [H-SV].

Autonics TK Series Specifications

General

Brand	Autonics
Model	TK Series
Category	Temperature Controller
Language	English