Autonics TK Series User Manual

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 105
6.7.8 Parameter reset [INIT]
This function is to reset all parameters in memory to factory defaults.
Press and hold the front panel's keys for 5 sec. The INIT parameter will be
displayed. Select YES to reset the parameters.
Setting
group
Parameter Setting range
Factory
default
Unit
- INIT YES / NO NO -
If the password feature is activated, it is required to enter a password to activate this function.
Resetting the parameters also resets the password.
If this parameter reset [INIT] is masked, it cannot be used.
6.7.9 Password settings [PAR5 → PWD]
Assigning password access to SV group features (excluding digital input key) and Parameter 1
through 5 prevents unauthorized modification to the parameter settings.
Password setting applies to SV group features (excluding digital input key) and Parameter 1
through 5 comprehensively.
Changing the password setting automatically activates password protection. Setting the
password to 0000, however, disables password protection.
0001 is a read-only password. Under this setting, the user may check parameter settings
without knowing the password. The user, however, cannot change parameter settings.
Accessing the PWD parameter with the read-only password displays a coded form of the setting.
 Settings
1st When in RUN mode, press and hold the key.
2nd Use the keys to select PAR5 and then press the key.
3rd Press the key to search PWD.
4th Select the desired digit using the key.
5th Use the keys to set the password (0000, 0002 to 9999) then press the
key to set the password.
6th Repeat steps 4 and 5 and enter the preset password.
7th Press the key or do not make any additional key entry for 3 sec. to save the
password.
Setting
group
Parameter Setting range
Factory
default
Unit
PAR5 PWD
0000 (password protection deactivated.)
0002 to 9999 (password protection on.)
0000 -
‘6.7.4 Digital input’ features are not affected by password protection settings.

Autonics TK Series Specifications

General

Brand	Autonics
Model	TK Series
Category	Temperature Controller
Language	English