Autonics TK Series - Enable;Disable Communication Write[Par4→ COMW]; USB to Serial Communication Connection

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 97
6.6.6 Enable/Disable communication write[PAR4→ COMW]
This feature can change parameter settings stored in memory through communication with PC,
GP, PLC, etc., in order to permit or prohibit writing.
Setting
Description
EnA Parameter set/change enable via communication.
DIsA
Prohibit parameter setting or modification via communication.
Setting
group
Parameter Setting range
Factory
default
Unit
PAR4 COMW EnA / DIsA EnA -
Reading parameter settings is available even though prohinit parameter setting.
6.6.7 USB to Serial communication connection
Data can be transmitted via a USB-to-serial connection. However, RS485 communication
through a USB-to-serial connection is blocked by hardware.