Autonics TK Series User Manual

8 DAQMaster
120 © Copyright Reserved Autonics Co., Ltd.
8.3 Special feature for TK Series
Parmaeter mask and user parameter group is available by DAQMaster. Visit our website
(
www.autonics.com) to download DAQMaster software and the manual.
8.3.1 Parameter mask
This feature is able to hide unnecessary parameters to user environment or less frequenctly
used parameters in parameter group.
Masked parameters are not only displayed. The set value of masked parameters are applied.
No
Item
Description
①
Parameter mask
selection
Select the to-be masked parameters.
Right-click the to-be masked parameters and they turn gray.
②
Download Applies the set masked parameters to the device.
③
Save Saves the set masked parameters as a mask information file.
④
Open Opens the saved mask information file.
⑤
Initialize factory
default
Clears the set for the masked parameters.
Download this setting to apply it to the device.
⑥
Close Closes the Parameter Mask Settings dialog.
⑦
Device information Displays device name, unit address, model name, and version.

Autonics TK Series Specifications

General

Brand	Autonics
Model	TK Series
Category	Temperature Controller
Language	English