Autonics TM4-N2RB User Manual

Preface
© Copyright Reserved Autonics Co., Ltd. I
USER MANUAL

Autonics TM4-N2RB Specifications

General

Model	TM4-N2RB
Input Type	Thermocouple / RTD
Dimensions (W x H)	48 x 48 mm
Mounting	Panel Mount
Thermocouple Types	K, J, T, E, R, S, B, N
RTD Types	Pt100, JPt100
Output Type	Relay
Display Type	LED
Control Method	PID
Power Supply	100-240 VAC 50/60 Hz
Control Output Method	Relay
Alarm Output	Relay
Operating Ambient Temperature	0 to 50 °C
Hysteresis	Adjustable
Storage Temperature	-20 to 60 °C

Summary

Product Introduction

Features

Detailed overview of the TM Series temperature controller's capabilities and advantages.

Components and Accessories

List and description of included components and optional accessories for the TM Series.

Models Overview

Explanation of model naming conventions and available configurations for the TM Series.

Front Parts Identification

Identification of the physical parts and indicators on the front of the TM Series controller.

Other Parts Description

Description of other physical components and features of the TM Series controller.

Specifications

General Specifications

Comprehensive technical specifications for TM2 and TM4 series temperature controllers.

Dimensions and Installation

Installation Guide

Guidance on installing the TM Series controller, including connector and module connection.

Module Connection Methods

Instructions for connecting expansion modules to the basic TM Series unit.

Mounting Options

Methods for mounting the controller using bolts or on a DIN rail.

Connections and Block Diagrams

TM2 Series Wiring

Wiring diagrams and terminal layouts for the TM2 Series temperature controller.

TM4 Series Wiring

Wiring diagrams and terminal layouts for the TM4 Series temperature controller.

Wiring Precautions

Important safety and best practice guidelines for wiring the temperature controller.

Preparation and Startup

General Process Steps

Step-by-step guide for initial setup and preparation before operating the TM Series.

Power ON Setup Values

Default and previous settings for various parameters upon powering on the controller.

Temperature Control Examples

Practical examples illustrating temperature control configurations for single and multiple modules.

Parameter Settings and Functions

Input Configuration

Settings related to input sensors, type selection, and temperature range.

Control and Temperature Control

Configuration of output modes, control algorithms, and auto-tuning for temperature management.

Alarm and Monitoring Functions

Configuration for alarms, monitoring of process variables, and fault detection.

Communications Setup

Configuration and setup for communicating with external devices and systems.

Operational Control and Error Handling

Functions for controlling operation state, handling errors, and initializing parameters.

Simple Error Diagnosis

Error Display Indicators

Interpreting status indicators and error messages displayed by the controller.

Troubleshooting Common Issues

Guidance on diagnosing and resolving common operational problems and communication failures.

DAQMaster Software

DAQMaster Overview

Introduction to DAQMaster, a device management program for Autonics products.

DAQMaster Features

Key features and functionalities of the DAQMaster software for data management and monitoring.