1 Product Introduction
22 © Copyright Reserved Autonics Co., Ltd.
1.4 Parts descriptions
① Measured value(PV) display part:
RUN mode: It displays currently measured value (PV).
Setting mode: It displays the parameter.
② Set value (SV) display part:
RUN mode: It displays the set value (SV).
Setting mode: It displays the set value of the parameter.
③ Unit(℃/℉/%) indicator: It displays the unit set at display unit [UNT] in parameter 3 group.
(TK4N Seires does not support ‘%’ unit.)
④ Manual control indicator: It turns ON during manual controlling.
⑤ Multi SV indicator: One of SV1 to 3 indicator will be ON in case of selecting multi SV
function.
⑥ Auto tuning indicator: It flashes by 1 sec. when executing auto tuning.
To Next Page
Loading...
