1 Product Introduction
© Copyright Reserved Autonics Co., Ltd. 21
※1. In case of TK4N/SP Series, option control output selection and digital input will be
limited due to number of terminals.
※2. “S” represents SSR drive output support models which SSRP function (standard
ON/OFF, cycle, phase)control are available. “C” represents selectable current and
SSR drive output support models.
※3. Select “R” or “C” type in case of using heating & cooling control. “N” type in case fo
using standard control.
※4. Does not support in AC/DC voltage type model.
※5. Does not support in TK4N.
※6. The CT input model of TK4N is selectable only for standard model which has alarm 1.
※7. The Heaing & Cooling model of TK4N-1□□□ has only alarm output 2.
※8. Only for TK4S-D□□□, OUT2 output terminal is used as DI-2 input terminal.
※9. 11Pin socket(PG-11, PS-11(N)): Sold separately
CT (Current Transformer) input is supported by all models.
However, TK4SP (11 pin plug type) does not support CT input due to its limited number of
terminal blocks.
To Next Page
Loading...
Need help?
General
