Autronica Autroprime BS-200M User Manual

System Characteristics
System Description, Autroprime Interactive Fire Detection System, 116-P-APRIME-SYSTEMD/XGB 2007-10-10,
Autronica Fire and Security AS
Page 8
2.6 CE Marking Information
2.7 Definitions
• A System Unit is defined as a unit that is directly connected to the
Fire Alarm Control Panel’s internal bus system.
• A Loop Unit is defined as either a Point, an I/O-unit or an Electronic
Sounder that is connected to a detection loop.
• A Point is defined as either a detector or a manual call point.
2.8 System Capacity
Maximum number of;
Detection Loops per fire alarm control panel, standard and agricultural variant 2
Detection Loops per fire alarm control panel, maritime variant 4
Loop units per detection loop 127
Loop units per branch on a detection loop 32
Loop sounders per detection loop 40
Fire Brigade/Information/Repeater panels per fire alarm control panel 8
Serial ports 1
Ethernet 1
USB Host ports 2
Mimic Driver BUR-200 1
Languages supported 15
Autronica Fire and Security AS
7483 Trondheim
07
EN 54 –2:2007
Control and indicating equipment for fire detection and fire alarm systems for
buildings
BS-200 / BS-200M / BS-200L
Provided options:
See chapter 2.5.1 in this handbook.
Other technical data:
See
Autroprime Installation Handbook 116-P-APRIME-INSTALL/DGB

Autronica Autroprime BS-200M Specifications

General

Brand	Autronica
Model	Autroprime BS-200M
Category	Firefighting Equipment
Language	English