Autronica Autroprime BS-200M User Manual

Detectors and Loop Units
System Description, Autroprime Interactive Fire Detection System, 116-P-APRIME-SYSTEMD/XGB 2007-10-10,
Autronica Fire and Security AS
Page 23
5. Detectors and Loop Units
5.1 Overview
Autroprime supports various Autronica loop units, including
detectors, manual callpoints, input and output units, interfaces and
alarm devices. These can be mixed freely and connected at any point
on the same detection loop. The system supports SelfVerify™
detectors as well as Autronica 200, 300 and 500 series detectors.
Autroprime supports Autronica detectors and loop units with the most
recent software versions.
The maximum number of loop units on each detection loop is 127.
The system provides the power necessary to activate 40 loop
sounders per detection loop.
Note that EX-detectors require stub-mounted Zener barrier BZ-500.
5.1.1 Heat detectors
Autroprime supports the following heat detectors:
• BD-200
• BD-300
• BD-500
• BD-501
5.1.2 Smoke detectors
Autroprime supports the following smoke detectors:
• BH-200
• BH-300
• BH-500
5.1.3 MultiSensors
Autroprime supports the following MultiSensors:
• BH-220
• BH-320
• BH-520

Autronica Autroprime BS-200M Specifications

General

Brand	Autronica
Model	Autroprime BS-200M
Category	Firefighting Equipment
Language	English