AVA WEIGH 334PCS15 - Page 11

1. Recall the stored direct unit price by pressing M1-MXX key, the recalled unit price will be displayed in
UNIT PRICE window. The TOTAL PRICE window will display the first six characters of the item name,
followed by the actual total price.
1. Under the normal weighing mode, press
RC.PLU key to enter this mode, and display “rc.PLU” in
WEIGHT window, display “Addr.” (The Address range is from 1 to 265) in TOTAL PRICE window. The
UNIT PRICE window will display input address data.
2. Use the numerical 0~9 and
CLEAR key to input the PLU’s address, use Enter key to confirm and go to
the next step or press
ON/OFF key to exit this mode and return back to the normal weighing mode.
3. Then the
UNIT PRICE window will display the recalled unit price, the TOTAL PRICE window displays
the first six characters of the item name and then will go back to the normal total price displaying mode
later, and then use new unit price, tare weight, new weight unit trade name, shell life)
1. In normal weighing mode, press and hold down
ON/OFF and 1 key at the same me unl the WEIGHT
window shows “Setup”,
UNIT PRICE windows shows “BLT.MOD” (LCD backlight mode) and the TOTAL
PRICE
window shows the backlight mode “x” (x=1,2,3).
Use the
0-3 numerical keys to input the mode, and press the ENTER key for confirmaon and go to
step 2. Press
ON/OFF key to exit this mode and the scale will automacally reset.
x=1 – backlight is always off
x=2 – backlight is always on
x=3 – backlight on request (backlight temporarily switches off aer 15 seconds of inacvity)
In normal weighing mode, if the backlight mode is set to 1 or 3, press and hold
C key to toggle the
backlight on or off.
2. When
UNIT PRICE window shows “LCd.CST” (LCD contrast) and the TOTAL PRICE window shows
the contrast level x (x=1-4,default is 1). Use the numerical keys to input the contrast level, and press
ENTER key for confirmaon. Press ON/OFF key to exit this mode and scale will automacally reset.
1. Under the normal weighing mode, press and hold
ON/OFF and 2 key at the same me unl the scale
displays “SETUP” in
WEIGHT window, “A.OFF.t” (auto off me) in UNIT PRICE window and auto-off
me xx in minutes (xx=00-30 minutes, when 00 is used that means no auto-off funcon) in
TOTAL
PRICE
window. Use numerical keys to input the auto-off me and press ENTER key for confirmaon.
Press
ON/OFF key to exit this mode and the scale will automacally reset.
1. In normal weighing mode, press
ON/OFF and 3 key at the same me unl the WEIGHT window shows
“Code 2.” Now
WEIGHT window will show “UoL.x.x” (Voltage x.x V), this means the inner working
voltage is x.x.V. If the scale uses an AC power adapter, the voltage is the power adapter voltage aer
regulang. If an AC adapter is not used, the voltage is the baery’s voltage. A/D internal code will be
displayed in
TOTAL PRICE .
10.
RECALL DIRECT PLU
RECALL INDIRECT PLU
LCD CONTRAST & BACKLIGHT MODE SETTING
AUTO-OFF TIME SETTING
DISPLAY A/D INNER CODE AND WORKING VOLTAGE