AVA WEIGH 334PCS15 - Display Symbol Meanings

Weight signal is too large
No proper data can be displayed
Weight signal is too small
Zero point is over the seng range
Zero point is below the seng range
Error in unit key operaon
The seng parameter(s) is not in normal range
There is an error in calibraon
ADC is over max. range CAP. --------Capacity
Voltage
To set and store the indirect unit price
PLU address
Weighing unit selecng
Recall PLU
To unload the weight
To load the weight
To input load weight
Calibraon enable switch is ON
Calibraon enable switch is OFF
DISPLAY SYMBOL MEANINGS
18.