GAS CONVERSION
CONVERSION FROM NATURAL GAS (NG) TO PROPANE (LPG)
Every range is provided with a set of injectors for the various types of gas.
Select the injectors to be replaced according to the “INJECTORS TABLE”.
The nozzle diameters, expressed in hundredths of a millimeter, are marked on the body of each injector.
Any conversion required must be performed by your dealer or a qualified licensed plumber or gas service
company.
Please provide the service person with this manual before work is started on the range.
(Gas conversions are the responsibility of the dealer or end user.)
SETTING THE PRESSURE REGULATOR
Open the regulator cover by turning the cover in a counter-clockwise direction.
See the pressure screw installed in the cover. This is the Natural Gas position.
Carefully unscrew the pressure screw and remove it along with the spring below.
Invert the position of the pressure screw and spring
Reinstall the pressure screw as showing in the image above.
Re-Install the regulator cover by screwing into place in a clockwise direction.
Ensure the cover securely closed before installing the regulator and connecting to the
gas supply.
To Next Page
Loading...
Need help?
General
