EasyManuals Logo

Avanti GR2011CW Installation Instructions

Avanti GR2011CW
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
INSTALLATION
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1.
The anti-tip bracket has to be attached as shown on figure below (only rear right
side), it has to be fixed on the floor and on the rear wall by four (4) suitable
screws (not supplied).
2.
After fixing the anti-tip bracket, slide range into place. Be sure the rear right foot
slides under the anti-tip bracket attached.
YOU MUST USE T H E
ANTI-TIP / STABILITY
BRACKET TO PREVENT
UNIT FROM TIPPING.

Other manuals for Avanti GR2011CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avanti GR2011CW and is the answer not in the manual?

Avanti GR2011CW Specifications

General IconGeneral
BrandAvanti
ModelGR2011CW
CategoryRanges
LanguageEnglish

Related product manuals