INSTALLATION INSTRUCTIONS
WARNING!
THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER.
Installation must conform with all local codes.
Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a
qualified installer, service agent or the gas supplier.
TOOLS NEEDED FOR INSTALLATION (NOT SUPPLIED WITH THE APPLIANCE)
Screwdriver
2 - Wrench
T-handle
wrench
Angled
hexagon key
Pencil
Tape
measure
Suitable protective
gloves
Hammer
Adjustable
wrench
Adjustable
pliers
Drill
Fig. 1
IMPORTANT: The use of suitable protective clothing/gloves is
recommended when handling, installing of this appliance.
To Next Page
Loading...
Need help?
General
