Avantree Opera Plus - Setting up Your TV

User Manual Opera plus
13
EN
Setting Up Your TV(For Optical&HDMI ARC Connections only)
If you’re having trouble nding these settings, you can scan the QR code
correlating to your TV’s brand OR visit avantree.com/opera/tv-audio-settings
for a more detailed guide.
If you connected to your TV via the optical OUT, OPT / OUT or HDMI ARC port,
you’ll need to congure your TV settings before you receive audio.
STEP 1
Using your TV’s remote control, press the SETTINGS button and navigate to the
AUDIO tab within the settings menu. (Please note that there may be
dierences in the setting names depending on your brand of TV).
STEP 2
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / DIGITAL OUT/ HDMI
ARC”. Many TVs will do this automatically; skip this step as needed.
STEP 3
Set Audio Output format to “PCM / STEREO” ON or “DOLBY” OFF.
NOTE 1: Smart TVs automatically reset their settings after system updates.
If you’re not getting sound, make sure your audio output / input format is
set to “PCM” and NOT “AUTO” or “Dolby.”
NOTE 2: When using Netix or Amazon Prime, you may need to start the
movie / show before changing the audio settings to “PCM.”
Sound
Audio Out Optical Out
Sound
Audio Out HDMI ARC Out
Digital
Audio
Format
or
PCM/Stereo
Dolby - OFF
LG SONY SAMSUNG NETFLIX/
AMAZON PRIME