Avaya 1603 - Conference calls; Making a conference call; Adding a person on hold to a conference call; Putting a conference call on hold

1603 Phone Page 17
- Issue 01b (09 September 2008)IP Office 4.2
Basic Telephone Operation: The Avaya Menu
Turning button click sounds on and off
1. Press the A button.
2. Press # to scroll to Sounds.
3. Press * to select Sounds.
4. Press # to select Next.
5. Press - or + on the volume button to turn button click sounds on and off.
Turning error tones on or off
1. Press the A button.
2. Press # to scroll to Sounds.
3. Press * to select Sounds.
4. Press # to scroll to Error Tones.
5. Press - or + on the volume button to turn error tones on or off.
Turning visual alerting on or off
When the Visual Alerting option is turned on, incoming calls cause the LED in the top right corner of the phone to flash.
You can turn Visual Alerting on or off.
1. Press the A button.
2. Press # to continue.
3. Press * to select Screen.
4. Press # to scroll to Visual Alert.
5. Press - or + on the volume button to turn visual alerting on or off.
Setting Automatic Gain Control
Automatic Gain Control helps to maintain a constant audio level by automatically increasing or decreasing the gain
depending upon the signal level. For high level signals, the gain is reduced and for low level signals, the gain is increased.
1. Press the A button.
2. Press # to scroll to Advanced.
3. Press * to select Advanced.
4. Press # to select AGCHandset or AGCSpeaker.
5. Press - or + on the volume button to turn automatic gain control on or off.