Avaya 1603 - Logging in to and out of your telephone; Logging in to your telephone; Logging out of your telephone

1603 Phone Guide Page 11
15-601013 Issue 04a (Friday, April 20, 2018)IP Office
Comments on this document? infodev@avaya.com
The Phone: Important Safety Information
1.2 About LEDs
Each button has two LEDs, one green and one red, to indicate the status of the button. The status is identified by whether
the LED is turned on, off, or blinking as described in the following tables.
Table 1. Appearance Button LEDs
LED
Description
Steady green
Call appearance is active.
Slow blinking green
Call appearance is ringing.
Fast blinking green
Call appearance is on hold.
Very fast blinking green
Conference or Transfer is pending.
Steady red
Call appearance is selected and will be used when you go off-hook. It remains steady red
while you use the call appearance.
Off
Call appearance is available.
Table 2. Feature Button LEDs
LED
Description
Steady green
Feature is active.
Blinking green
Feature is pending (request is being processed and not immediately available).
Off
Feature is not active.