Avaya 1608 - Page 17

o Incoming calls will now cause the LED in the top right corner of the phone to flash.
6. To exit this screen press the Phone/Exit button.
To turn visual alerting off:
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Visual Alerting.
5. Press the Off softkey, the OK button, or the right or left navigation arrow to turn visual alerting off.
o Visual alerting is turned off.
o Incoming calls will no longer cause the LED in the top right corner of the phone to flash.
6. To exit this screen press the Phone/Exit button.
To turn automatic gain control on:
Note: Automatic Gain Control helps to maintain a constant audio level by automatically increasing or decreasing the gain
depending upon the signal level. For high level signals, the gain is reduced and for low level signals, the gain is increased.
1. Press the A button.
2. Scroll to Advanced Options.
3. Press the Select softkey or the OK button.
4. Select Automatic Gain Control.
5. Press the Select softkey or the OK button.
6. Select Handset, Headset, or Speaker.
7. Press the On softkey, the OK button, or the right or left navigation arrow to turn automatic gain control on.
o Gain control is enabled.
8. To exit this screen press the Phone/Exit button.
To turn automatic gain control off:
1. Press the A button.
2. Scroll to Advanced Options.
3. Press the Select softkey or the OK button.
4. Select Automatic Gain Control.
5. Press the Select softkey or the OK button.
6. Select Handset, Headset, or Speaker.
7. Press the Off softkey, the OK button, or the right or left navigation arrow to turn automatic gain control off.
o Gain control is disabled.
8. To exit this screen press the Phone/Exit button.
To access and use the Features Menu:
Note: The Features Menu provides access to the same advanced telephone features, such as Directory and Call Forwarding,
that are programmed on your feature buttons. In addition to providing another way of accessing the features, you can use the
Features Menu to confirm the features programmed on the feature buttons if, for example, a feature button label is missing or
labeled incorrectly.
1. From the Phone screen, scroll right to access the Features Menu.
2. Scroll down to see the features that have been administered for your extension.
Note: The green LED next to the Feature button indicates if the feature is currently on or off. If the light is on, the
feature is on. The red LED next to the Feature button blinks while the feature label is displayed on the screen.
3. To exit the Features Menu, press the Phone/Exit button or the Exit softkey.
To view network information:
1. Press the A button.
2. Scroll to Network Information.
3. Select Audio Parameters, IP Parameters, Quality of Service, Interfaces, or Miscellaneous.
4. Press the View softkey or the OK button.
5. To exit this screen press the Phone/Exit button.
1608 IP Telephone End User Guide | 17 | Page