Figure 2: Rear view of stack connectors on ERS 3524GT/3524GT-PWR+
The following diagram illustrates the stack connectors for the ERS 3526T/3526T
-PWR+
units.
Figure 3: Rear view of stack connectors on ERS 3526T/3526T-PWR+
Related topics:
Base Unit select switch on page 19
Cascade Down port on page 20
Cascade Up port on page
20
Base Unit select switch
Use the Base Unit Select switch to designate a switch in the stack as the base unit. Slide the
Base Unit Select switch to the right to designate a switch as the base unit. You can designate
only one switch in a stack as the base unit; that is, with the switch in the base unit position.
Avaya Ethernet Routing Switch 3500 series stacking
February 2013 19
To Next Page
Loading...
