4. Insert and tighten the rack-mount screws.
5.
Verify that the switch is securely fastened to the rack.
6. Connect power and network connections to the switch.
Cable requirements for the VSP 8000 Series
The following table describes the cables required for an Avaya Virtual Services Platform 8000
Series.
Table 8: Switch cable requirements
Required Cable Description
10/100/1000BASE-TX Ports The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
Console Port (10101) Varies depending on the user device. The Avaya Virtual Services
Platform 8000 Series
has an RJ-45 female connector so a serial
Table continues…
Cable requirements for the VSP 8000 Series
November 2016 Installing the Avaya VSP 8000 Series 69
Comments on this document? infodev@avaya.com
To Next Page
Loading...
