Avaya 8000 Series - LED State Definitions; Switch Leds

show sys-info temperature
Example
Check the status of the fan modules.
VSP-8000:1>show sys-info fan
Fan Info :
Fan Id Fan Status Fan Type
---------------------------------------
1 up regularSpeed
2 up regularSpeed
3 up regularSpeed
4 up regularSpeed
Check the internal temperature of the switch.
VSP-8000:1>show sys-info temperature
Temperature Info :
CPU Temperature MAC Temperature PHY1 Temperature PHY2 Temperature
26 29 24 27
LED state definitions
The figures and tables in the following sections describe the LEDs on the Avaya Virtual Services
Platform 8000 Series
switch. The tables describe LED operation for a switch that finishes the power-
on self-test.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.
Switch LEDs
The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Table 14: Switch LED state indicators
Label Color and Status Description
PWR Off The switch is not receiving power and not operating.
Green (steady) The switch is receiving power from either one of the power
supplies (if two power supplies are installed).
Status Off The switch is non-operational.
Amber (steady) The switch encountered an error when running the diagnostic
software.
Table continues…
Installing the Avaya Virtual Services Platform 8000 Series
November 2016 Installing the Avaya VSP 8000 Series 82
Comments on this document? infodev@avaya.com