4
ADHOC CONFERENCE: Allows you to add multiple parties to a call (With call on line)
Press CONFERENCE Softkey, first call automatically holds, you hear dial tone.
Enter Second Number (internal or external).
IMPORTANT: Wait for answer and announce conference.
Press CONFERENCE Softkey again. All parties are connected.
+ To add additional parties, repeat above procedure.
+ To drop yourself from the conference, Hang up.
+ To Drop another member from the conference:
Press DETAILS Softkey, display gives participant information.
Press Up/Down Arrow Keys to scroll through participants.
Press DROP Softkey to drop desired participant.
+ To Mute another member, Press MUTE Softkey.
+ To Mute yourself, Press MUTE fixed key.
IF CALLED PARTY DOESN’T ANSWER/BUSY: To return to original call
Press CANCEL Softkey or CALL APPEARANCE key of the held line (fast green flash).
NOTE: The number of external callers you can bring into this type of conference is dependent upon the type of service
from your dial tone provider. Check with your system administrator.
To Next Page
Loading...
