Service: 604 -856- 9155
Email: service@natg.ca
Do Not Disturb
▪ Press your Right Arrow
▪ Press DND key (button will light green when on)
To Cancel: Press DND key (or press Status on display, then press Off)
Button Programming
▪ Press Features Soft key
▪ Select Phone User
▪ Select Self Administer
▪ When prompted for a security Pin, enter your Extension number
▪ Scroll through your available buttons
▪ Select the button you’d like to program, then press Replace soft key
▪ Scroll / to choose feature you would like to program. Most Common:
a) Abbreviated Dial to program an external Phone Number
Enter 9 + Phone Number (also add a 1 if long distance)
Press Save
Press More, then press Label
Enter the Name you would like associated with that number, press Save
b) User BLF to program an Internal Extension
c) Group BLF to program an Hunt Group (ie Sales, Parts, Service etc..)
▪ Press Save when done
▪ Press the Phone Icon to exit
Enter Personal Contacts:
Stores 100 personal numbers
▪ Press Contacts key
▪ Press your right arrow until you see Personal
▪ Press New soft key
▪ Spell out the name of the contact
▪ Press Number key on display or use arrow to enter phone number
▪ Dial 9 + Phone Number
▪ Press Save soft key
Calling out from Contacts:
▪ Press Contacts key, Use the left and right arrows to access your different directories:
a. All – Accesses all directories
b. External – Only external system wide speed dials(entered by system administrator)
c. Groups – Hunt groups(if applicable) ex. Accounting dept., service dept
d. Users – Internal Staff Directory
e. Personal – Numbers you have stored in your personal directory
▪ Key in the name of the contact you’d like to search or use the up and down arrows to scroll
through the list of contacts
▪ Press Call to call or details to see the details of the contact
To Next Page
Loading...
